C Language

Interprocess Communication (IPC)

Introduction#

Inter-process communication (IPC) mechanisms allow different independent processes to communicate with each other. Standard C does not provide any IPC mechanisms. Therefore, all such mechanisms are defined by the host operating system. POSIX defines an extensive set of IPC mechanisms; Windows defines another set; and other systems define their own variants.

Semaphores

Semaphores are used to synchronize operations between two or more processes. POSIX defines two different sets of semaphore functions:

  1. ‘System V IPC’ — semctl(),

semop(), semget(). 2. ‘POSIX Semaphores’ — sem_close(), sem_destroy(), sem_getvalue(), sem_init(), sem_open(), sem_post(), sem_trywait(), sem_unlink().

This section describes the System V IPC semaphores, so called because they originated with Unix System V.

First, you’ll need to include the required headers. Old versions of POSIX required #include <sys/types.h>; modern POSIX and most systems do not require it.

#include <sys/sem.h>

Then, you’ll need to define a key in both the parent as well as the child.

#define KEY 0x1111 

This key needs to be the same in both programs or they will not refer to the same IPC structure. There are ways to generate an agreed key without hard-coding its value.

Next, depending on your compiler, you may or may not need to do this step: declare a union for the purpose of semaphore operations.

union semun {
    int val;
    struct semid_ds *buf;
    unsigned short  *array;
};

Next, define your try (semwait) and raise (semsignal) structures. The names P and V originate from Dutch

struct sembuf p = { 0, -1, SEM_UNDO}; # semwait
struct sembuf v = { 0, +1, SEM_UNDO}; # semsignal

Now, start by getting the id for your IPC semaphore.

int id;
// 2nd argument is number of semaphores
// 3rd argument is the mode (IPC_CREAT creates the semaphore set if needed)
if ((id = semget(KEY, 1, 0666 | IPC_CREAT) < 0) {
    /* error handling code */
}

In the parent, initialise the semaphore to have a counter of 1.

union semun u;
u.val = 1;
if (semctl(id, 0, SETVAL, u) < 0) { // SETVAL is a macro to specify that you're setting the value of the semaphore to that specified by the union u
    /* error handling code */
}

Now, you can decrement or increment the semaphore as you need. At the start of your critical section, you decrement the counter using the semop() function:

if (semop(id, &p, 1) < 0) {
    /* error handling code */
}

To increment the semaphore, you use &v instead of &p:

if (semop(id, &v, 1) < 0) {
    /* error handling code */
}

Note that every function returns 0 on success and -1 on failure. Not checking these return statuses can cause devastating problems.


Example 1.1: Racing with Threads

The below program will have a process fork a child and both parent and child attempt to print characters onto the terminal without any synchronization.

#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>

int main()
{
    int pid;
    pid =  fork();
    srand(pid);
    if(pid < 0)
    {
        perror("fork"); exit(1);
    }
    else if(pid)
    {
        char *s = "abcdefgh";
        int l = strlen(s);
        for(int i = 0; i < l; ++i)
        {
            putchar(s[i]);
            fflush(stdout);
            sleep(rand() % 2);
            putchar(s[i]);
            fflush(stdout);
            sleep(rand() % 2);
        }
    }
    else
    {
        char *s = "ABCDEFGH";
        int l = strlen(s);
        for(int i = 0; i < l; ++i)
        {
            putchar(s[i]);
            fflush(stdout);
            sleep(rand() % 2);
            putchar(s[i]);
            fflush(stdout);
            sleep(rand() % 2);
        }
    }
}

Output (1st run):

aAABaBCbCbDDcEEcddeFFGGHHeffgghh

(2nd run):

aabbccAABddBCeeCffgDDghEEhFFGGHH

Compiling and running this program should give you a different output each time .

Example 1.2: Avoid Racing with Semaphores

Modifying Example 1.1 to use semaphores, we have:

#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <sys/types.h>
#include <sys/ipc.h>
#include <sys/sem.h>

#define KEY 0x1111

union semun {
    int val;
    struct semid_ds *buf;
    unsigned short  *array;
};

struct sembuf p = { 0, -1, SEM_UNDO};
struct sembuf v = { 0, +1, SEM_UNDO};

int main()
{
    int id = semget(KEY, 1, 0666 | IPC_CREAT);
    if(id < 0)
    {
        perror("semget"); exit(11);
    }
    union semun u;
    u.val = 1;
    if(semctl(id, 0, SETVAL, u) < 0)
    {
        perror("semctl"); exit(12);
    }
    int pid;
    pid =  fork();
    srand(pid);
    if(pid < 0)
    {
        perror("fork"); exit(1);
    }
    else if(pid)
    {
        char *s = "abcdefgh";
        int l = strlen(s);
        for(int i = 0; i < l; ++i)
        {
            if(semop(id, &p, 1) < 0)
            {
                perror("semop p"); exit(13);
            }
            putchar(s[i]);
            fflush(stdout);
            sleep(rand() % 2);
            putchar(s[i]);
            fflush(stdout);
            if(semop(id, &v, 1) < 0)
            {
                perror("semop p"); exit(14);
            }

            sleep(rand() % 2);
        }
    }
    else
    {
        char *s = "ABCDEFGH";
        int l = strlen(s);
        for(int i = 0; i < l; ++i)
        {
            if(semop(id, &p, 1) < 0)
            {
                perror("semop p"); exit(15);
            }
            putchar(s[i]);
            fflush(stdout);
            sleep(rand() % 2);
            putchar(s[i]);
            fflush(stdout);
            if(semop(id, &v, 1) < 0)
            {
                perror("semop p"); exit(16);
            }

            sleep(rand() % 2);
        }
    }
}

Output:

aabbAABBCCccddeeDDffEEFFGGHHgghh

Compiling and running this program will give you the same output each time.


This modified text is an extract of the original Stack Overflow Documentation created by the contributors and released under CC BY-SA 3.0 This website is not affiliated with Stack Overflow