Ruby Language

Catching Exceptions with Begin / Rescue

A Basic Error Handling Block

Let’s make a function to divide two numbers, that’s very trusting about its input:

def divide(x, y)
  return x/y
end

This will work fine for a lot of inputs:

> puts divide(10, 2)
5

But not all

> puts divide(10, 0)
ZeroDivisionError: divided by 0

> puts divide(10, 'a')
TypeError: String can't be coerced into Fixnum

We can rewrite the function by wrapping the risky division operation in a begin... end block to check for errors, and use a rescue clause to output a message and return nil if there is a problem.

def divide(x, y)
  begin
    return x/y
  rescue
    puts "There was an error"
    return nil
  end
end

> puts divide(10, 0)
There was an error

> puts divide(10, 'a')
There was an error

Saving the Error

You can save the error if you want to use it in the rescue clause

def divide(x, y)
  begin
    x/y
  rescue => e
    puts "There was a %s (%s)" % [e.class, e.message]
    puts e.backtrace
  end
end

> divide(10, 0)
There was a ZeroDivisionError (divided by 0)
       from (irb):10:in `/'
       from (irb):10
       from /Users/username/.rbenv/versions/2.3.1/bin/irb:11:in `<main>'

> divide(10, 'a')
There was a TypeError (String can't be coerced into Fixnum)
/Users/username/.rbenv/versions/2.3.1/lib/ruby/2.3.0/irb/workspace.rb:87:in `eval'
/Users/username/.rbenv/versions/2.3.1/lib/ruby/2.3.0/irb/workspace.rb:87:in `evaluate'
/Users/username/.rbenv/versions/2.3.1/lib/ruby/2.3.0/irb/context.rb:380:in `evaluate'
/Users/username/.rbenv/versions/2.3.1/lib/ruby/2.3.0/irb.rb:489:in `block (2 levels) in eval_input'
/Users/username/.rbenv/versions/2.3.1/lib/ruby/2.3.0/irb.rb:623:in `signal_status'
/Users/username/.rbenv/versions/2.3.1/lib/ruby/2.3.0/irb.rb:486:in `block in eval_input'
/Users/username/.rbenv/versions/2.3.1/lib/ruby/2.3.0/irb/ruby-lex.rb:246:in `block (2 levels) in each_top_level_statement'
/Users/username/.rbenv/versions/2.3.1/lib/ruby/2.3.0/irb/ruby-lex.rb:232:in `loop'
/Users/username/.rbenv/versions/2.3.1/lib/ruby/2.3.0/irb/ruby-lex.rb:232:in `block in each_top_level_statement'
/Users/username/.rbenv/versions/2.3.1/lib/ruby/2.3.0/irb/ruby-lex.rb:231:in `catch'
/Users/username/.rbenv/versions/2.3.1/lib/ruby/2.3.0/irb/ruby-lex.rb:231:in `each_top_level_statement'
/Users/username/.rbenv/versions/2.3.1/lib/ruby/2.3.0/irb.rb:485:in `eval_input'
/Users/username/.rbenv/versions/2.3.1/lib/ruby/2.3.0/irb.rb:395:in `block in start'
/Users/username/.rbenv/versions/2.3.1/lib/ruby/2.3.0/irb.rb:394:in `catch'
/Users/username/.rbenv/versions/2.3.1/lib/ruby/2.3.0/irb.rb:394:in `start'
/Users/username/.rbenv/versions/2.3.1/bin/irb:11:in `<main>'

Checking for Different Errors

If you want to do different things based on the kind of error, use multiple rescue clauses, each with a different error type as an argument.

def divide(x, y)
  begin
    return x/y
  rescue ZeroDivisionError
    puts "Don't divide by zero!"
    return nil
  rescue TypeError
    puts "Division only works on numbers!"
    return nil
  end
end

> divide(10, 0)
Don't divide by zero!

> divide(10, 'a')
Division only works on numbers!

If you want to save the error for use in the rescue block:

rescue ZeroDivisionError => e

Use a rescue clause with no argument to catch errors of a type not specified in another rescue clause.

def divide(x, y)
  begin
    return x/y
  rescue ZeroDivisionError
    puts "Don't divide by zero!"
    return nil
  rescue TypeError
    puts "Division only works on numbers!"
    return nil
  rescue => e
    puts "Don't do that (%s)" % [e.class]
    return nil
  end
end

> divide(nil, 2)
Don't do that (NoMethodError)

In this case, trying to divide nil by 2 is not a ZeroDivisionError or a TypeError, so it handled by the default rescue clause, which prints out a message to let us know that it was a NoMethodError.

Retrying

In a rescue clause, you can use retry to run the begin clause again, presumably after changing the circumstance that caused the error.

def divide(x, y)
  begin
    puts "About to divide..."
    return x/y
  rescue ZeroDivisionError
    puts "Don't divide by zero!"
    y = 1
    retry
  rescue TypeError
    puts "Division only works on numbers!"
    return nil
  rescue => e
    puts "Don't do that (%s)" % [e.class]
    return nil
  end
end

If we pass parameters that we know will cause a TypeError, the begin clause is executed (flagged here by printing out “About to divide”) and the error is caught as before, and nil is returned:

> divide(10, 'a')
About to divide...
Division only works on numbers!
 => nil

But if we pass parameters that will cause a ZeroDivisionError, the begin clause is executed, the error is caught, the divisor changed from 0 to 1, and then retry causes the begin block to be run again (from the top), now with a different y. The second time around there is no error and the function returns a value.

> divide(10, 0)
About to divide...     # First time, 10 ÷ 0
Don't divide by zero!
About to divide...     # Second time 10 ÷ 1
=> 10

Checking Whether No Error Was Raised

You can use an else clause for code that will be run if no error is raised.

def divide(x, y)
  begin
    z = x/y
  rescue ZeroDivisionError
    puts "Don't divide by zero!"
  rescue TypeError
    puts "Division only works on numbers!"
    return nil
  rescue => e
    puts "Don't do that (%s)" % [e.class]
    return nil
  else
    puts "This code will run if there is no error."
    return z
  end
end

The else clause does not run if there is an error that transfers control to one of the rescue clauses:

> divide(10,0)
Don't divide by zero!
=> nil

But if no error is raised, the else clause executes:

> divide(10,2)
This code will run if there is no error.
=> 5

Note that the else clause will not be executed if you return from the begin clause

def divide(x, y)
  begin
    z = x/y
    return z                 # Will keep the else clause from running!
  rescue ZeroDivisionError
    puts "Don't divide by zero!"
  else
    puts "This code will run if there is no error."
    return z
  end
end

> divide(10,2)
=> 5

Code That Should Always Run

Use an ensure clause if there is code you always want to execute.

def divide(x, y)
  begin
    z = x/y
    return z
  rescue ZeroDivisionError
    puts "Don't divide by zero!"
  rescue TypeError
    puts "Division only works on numbers!"
    return nil
  rescue => e
    puts "Don't do that (%s)" % [e.class]
    return nil
  ensure
    puts "This code ALWAYS runs."
  end
end

The ensure clause will be executed when there is an error:

> divide(10, 0)
Don't divide by zero!   # rescue clause
This code ALWAYS runs.   # ensure clause
=> nil

And when there is no error:

> divide(10, 2)
This code ALWAYS runs.   # ensure clause
=> 5

The ensure clause is useful when you want to make sure, for instance, that files are closed.

Note that, unlike the else clause, the ensure clause is executed before the begin or rescue clause returns a value. If the ensure clause has a return that will override the return value of any other clause!


This modified text is an extract of the original Stack Overflow Documentation created by the contributors and released under CC BY-SA 3.0 This website is not affiliated with Stack Overflow