VBA

User Forms

Best Practices

A UserForm is a class module with a designer and a default instance. The designer can be accessed by pressing Shift+F7 while viewing the code-behind, and the code-behind can be accessed by pressing F7 while viewing the designer.


Work with a new instance every time.

Being a class module, a form is therefore a blueprint for an object. Because a form can hold state and data, it’s a better practice to work with a new instance of the class, rather than with the default/global one:

With New UserForm1
    .Show vbModal
    If Not .IsCancelled Then
        '...
    End If
End With

Instead of:

UserForm1.Show vbModal
If Not UserForm1.IsCancelled Then
    '...
End If

Working with the default instance can lead to subtle bugs when the form is closed with the red “X” button and/or when Unload Me is used in the code-behind.


Implement the logic elsewhere.

A form should be concerned with nothing but presentation: a button Click handler that connects to a database and runs a parameterized query based on user input, is doing too many things.

Instead, implement the applicative logic in the code that’s responsible for displaying the form, or even better, in dedicated modules and procedures.

Write the code in such a way that the UserForm is only ever responsible for knowing how to display and collect data: where the data comes from, or what happens with the data afterwards, is none of its concern.


Caller shouldn’t be bothered with controls.

Make a well-defined model for the form to work with, either in its own dedicated class module, or encapsulated within the form’s code-behind itself - expose the model with Property Get procedures, and have the client code work with these: this makes the form an abstraction over controls and their nitty-gritty details, exposing only the relevant data to the client code.

This means code that looks like this:

With New UserForm1
    .Show vbModal
    If Not .IsCancelled Then
        MsgBox .Message, vbInformation
    End If
End With

Instead of this:

With New UserForm1
    .Show vbModal
    If Not .IsCancelled Then
        MsgBox .txtMessage.Text, vbInformation
    End If
End With

Handle the QueryClose event.

Forms typically have a Close button, and prompts/dialogs have Ok and Cancel buttons; the user may close the form using the form’s control box (the red “X” button), which destroys the form instance by default (another good reason to work with a new instance every time).

With New UserForm1
    .Show vbModal
    If Not .IsCancelled Then 'if QueryClose isn't handled, this can raise a runtime error.
        '...
    End With
End With

The simplest way to handle the QueryClose event is to set the Cancel parameter to True, and then to hide the form instead of closing it:

Private Sub UserForm_QueryClose(Cancel As Integer, CloseMode As Integer)
    Cancel = True
    Me.Hide
End Sub

That way the “X” button will never destroy the instance, and the caller can safely access all the public members.


Hide, don’t close.

The code that creates an object should be responsible for destroying it: it’s not the form’s responsibility to unload and terminate itself.

Avoid using Unload Me in a form’s code-behind. Call Me.Hide instead, so that the calling code can still use the object it created when the form closes.


Name things.

Use the properties toolwindow (F4) to carefully name each control on a form. The name of a control is used in the code-behind, so unless you’re using a refactoring tool that can handle this, renaming a control will break the code - so it’s much easier to do things right in the first place, than try to puzzle out exactly which of the 20 textboxes TextBox12 stands for.

Traditionally, UserForm controls are named with Hungarian-style prefixes:

  • lblUserName for a Label control that indicates a user name.
  • txtUserName for a TextBox control where the user can enter a user name.
  • cboUserName for a ComboBox control where the user can enter or pick a user name.
  • lstUserName for a ListBox control where the user can pick a user name.
  • btnOk or cmdOk for a Button control labelled “Ok”.

The problem is that when e.g. the UI gets redesigned and a ComboBox changes to a ListBox, the name needs to change to reflect the new control type: it’s better to name controls for what they represent, rather than after their control type - to decouple the code from the UI as much as possible.

  • UserNameLabel for a read-only label that indicates a user name.
  • UserNameInput for a control where the user can enter or pick a user name.
  • OkButton for a command button labelled “Ok”.

Whichever style is chosen, anything is better than leaving all controls their default names. Consistency in naming style is ideal, too.

Handling QueryClose

The QueryClose event is raised whenever a form is about to be closed, whether it’s via user action or programmatically. The CloseMode parameter contains a VbQueryClose enum value that indicates how the form was closed:

Constant Description Value
vbFormControlMenu Form is closing in response to user action 0
vbFormCode Form is closing in response to an Unload statement 1
vbAppWindows Windows session is ending 2
vbAppTaskManager Windows Task Manager is closing the host application 3
vbFormMDIForm Not supported in VBA 4

For better readability, it’s best to use these constants instead of using their value directly.


A Cancellable UserForm

Given a form with a Cancel button

some sample form

The form’s code-behind could look like this:

Option Explicit
Private Type TView
    IsCancelled As Boolean
    SomeOtherSetting As Boolean
    'other properties skipped for brievety
End Type
Private this As TView

Public Property Get IsCancelled() As Boolean
    IsCancelled = this.IsCancelled
End Property

Public Property Get SomeOtherSetting() As Boolean
    SomeOtherSetting = this.SomeOtherSetting
End Property

'...more properties...

Private Sub SomeOtherSettingInput_Change()
    this.SomeOtherSetting = CBool(SomeOtherSettingInput.Value)
End Sub

Private Sub OkButton_Click()
    Me.Hide
End Sub

Private Sub CancelButton_Click()
    this.IsCancelled = True
    Me.Hide
End Sub

Private Sub UserForm_QueryClose(Cancel As Integer, CloseMode As Integer)
    If CloseMode = VbQueryClose.vbFormControlMenu Then
        Cancel = True
        this.IsCancelled = True
        Me.Hide
    End If
End Sub

The calling code could then display the form, and know whether it was cancelled:

Public Sub DoSomething()
    With New UserForm1
        .Show vbModal
        If .IsCancelled Then Exit Sub
        If .SomeOtherSetting Then
            'setting is enabled
        Else
            'setting is disabled
        End If
    End With
End Sub

The IsCancelled property returns True when the Cancel button is clicked, or when the user closes the form using the control box.


This modified text is an extract of the original Stack Overflow Documentation created by the contributors and released under CC BY-SA 3.0 This website is not affiliated with Stack Overflow