Syntax#

• transition: <property> <duration> <timing-function> <delay>;
• @keyframes <identifier>
• [ [ from | to | <percentage> ] [, from | to | <percentage> ]* block ]*

Parameters#

Animations with the transition property

Useful for simple animations, the CSS transition property allows number-based CSS properties to animate between states.

Example

.Example{
    height: 100px;
    background: #fff;
}

.Example:hover{
    height: 120px;
    background: #ff0000;
}

View Result

By default, hovering over an element with the .Example class would immediately cause the element’s height to jump to 120px and its background color to red (#ff0000).

By adding the transition property, we can cause these changes to occur over time:

.Example{
    ...
    transition: all 400ms ease;
}

View Result

The all value applies the transition to all compatible (numbers-based) properties. Any compatible property name (such as height or top) can be substituted for this keyword.

400ms specifies the amount of time the transition takes. In this case, the element’s change in height will take 400 milliseconds to complete.

Finally, the value ease is the animation function, which determines how the animation is played. ease means start slow, speed up, then end slow again. Other values are linear, ease-out, and ease-in.

Cross-Browser Compatibility

The transition property is generally well-supported across all major browsers, excepting IE 9. For earlier versions of Firefox and Webkit-based browsers, use vendor prefixes like so:

.Example{
    transition:         all 400ms ease;
    -moz-transition:    all 400ms ease;
    -webkit-transition: all 400ms ease;
}

Note: The transition property can animate changes between any two numerical values, regardless of unit. It can also transition between units, such as 100px to 50vh. However, it cannot transition between a number and a default or automatic value, such as transitioning an element’s height from 100px to auto.

Increasing Animation Performance Using the will-change Attribute

When creating animations and other GPU-heavy actions, it’s important to understand the will-change attribute.

Both CSS keyframes and the transition property use GPU acceleration. Performance is increased by offloading calculations to the device’s GPU. This is done by creating paint layers (parts of the page that are individually rendered) that are offloaded to the GPU to be calculated. The will-change property tells the browser what will animate, allowing the browser to create smaller paint areas, thus increasing performance.

The will-change property accepts a comma-separated list of properties to be animated. For example, if you plan on transforming an object and changing its opacity, you would specify:

.Example{
    ...
    will-change: transform, opacity;
}

Note: Use will-change sparingly. Setting will-change for every element on a page can cause performance problems, as the browser may attempt to create paint layers for every element, significantly increasing the amount of processing done by the GPU.

Animations with keyframes

For multi-stage CSS animations, you can create CSS @keyframes. Keyframes allow you to define multiple animation points, called a keyframe, to define more complex animations.

Basic Example

In this example, we’ll make a basic background animation that cycles between all colors.

@keyframes rainbow-background {
         0%     { background-color: #ff0000; }
     8.333%     { background-color: #ff8000; }
    16.667%     { background-color: #ffff00; }
    25.000%     { background-color: #80ff00; }
    33.333%     { background-color: #00ff00; }
    41.667%     { background-color: #00ff80; }
    50.000%     { background-color: #00ffff; }
    58.333%     { background-color: #0080ff; }
    66.667%     { background-color: #0000ff; }
    75.000%     { background-color: #8000ff; }
    83.333%     { background-color: #ff00ff; }
    91.667%     { background-color: #ff0080; }
    100.00%     { background-color: #ff0000; }
}

.RainbowBackground {
    animation: rainbow-background 5s infinite;
}

View Result

There’s a few different things to note here. First, the actual @keyframes syntax.

@keyframes rainbow-background{

This sets the name of the animation to rainbow-background.

0%     { background-color: #ff0000; }

This is the definition for a keyframe within the animation. The first part, the 0% in the case, defines where the keyframe is during the animation. The 0% implies it is 0% of the total animation time from the beginning.

The animation will automatically transition between keyframes. So, by setting the next background color at 8.333%, the animation will smoothly take 8.333% of the time to transition between those keyframes.

.RainbowBackground {
    animation: rainbow-background 5s infinite;
}

This code attaches our animation to all elements which have the .RainbowBackground class.

The actual animation property takes the following arguments.

• animation-name: The name of our animation. In this case, rainbow-background
• animation-duration: How long the animation will take, in this case 5 seconds.
• animation-iteration-count (Optional): The number of times the animation will loop. In this case, the animation will go on indefinitely. By default, the animation will play once.
• animation-delay (Optional): Specifies how long to wait before the animation starts. It defaults to 0 seconds, and can take negative values. For example, -2s would start the animation 2 seconds into its loop.
• animation-timing-function (Optional): Specifies the speed curve of the animation. It defaults to ease, where the animation starts slow, gets faster and ends slow.

In this particular example, both the 0% and 100% keyframes specify { background-color: #ff0000; }. Wherever two or more keyframes share a state, one may specify them in a single statement. In this case, the two 0% and 100% lines could be replaced with this single line:

0%, 100%     { background-color: #ff0000; }

Cross-browser compatibility

For older WebKit-based browsers, you’ll need to use the vendor prefix on both the @keyframes declaration and the animation property, like so:

@-webkit-keyframes{}

-webkit-animation: ...

Syntax Examples

Our first syntax example shows the animation shorthand property using all of the available properties/parameters:

  animation: 3s         ease-in           1s      2                 reverse     both        paused       slidein;
  /*         duration | timing-function | delay | iteration-count | direction | fill-mode | play-state | name   */

Our second example is a little more simple, and shows that some properties can be omitted:

  animation: 3s         linear            1s      slidein;
  /*         duration | timing-function | delay | name   */

Our third example shows the most minimal declaration. Note that the animation-name and animation-duration must be declared:

  animation: 3s         slidein;
  /*         duration | name */

It’s also worth mentioning that when using the animation shorthand the order of the properties makes a difference. Obviously the browser may confuse your duration with your delay.

If brevity isn’t your thing, you can also skip the shorthand property and write out each property individually:

animation-duration: 3s;
animation-timing-function: ease-in;
animation-delay: 1s;
animation-iteration-count: 2;
animation-direction: reverse;
animation-fill-mode: both;
animation-play-state: paused;
animation-name: slidein;